![background image](http://html1.mh-extra.com/html/cpi/indico-100-series/indico-100-series_service-and-installation-manual_2675023062.webp)
2
Installation
CPI Canada Inc.
Page 2-10
Rev. H Indico 100 Series Service Manual Ch # 740895-04
2.9.1 Control
Console
(Cont)
J2
D ATA L IN K
L C D
C O N T R A S T
C O N S O L E
G R O U N D
J5
G E N E R AT O R
IN T E R FA C E
J1 3
E X T E R N A L
S W IT C H
PA R T O F H A N D
S W IT C H (O P T IO N A L )
TO J 4 O F G E N E R ATO R
IN T E R FA C E B O A R D
J5
G E N E R ATO R
IN T ER FA C E
R 2
LC D
C O N T R A S T
J2
D ATA
LIN K
J1
F ILE : IN _C O N C B .C D R
C O N S O LE
G R O U N D
J4
Figure 2-3: Rear of control console
2.9.2 Remote
Fluoro
Control
(Optional)
1.
Connect the free end of the 9 conductor remote fluoro cable (from the optional remote fluoro
control box) to J11 of the generator CPU board. Ensure that the screw locks are fully tightened to
secure the connector. Refer to figure 2-4 for the location of J11 on the generator CPU board.
Figure 2-4: Remote fluoro connector on generator CPU board