![background image](http://html1.mh-extra.com/html/cpi/indico-100-series/indico-100-series_service-and-installation-manual_2675023088.webp)
2
Installation
CPI Canada Inc.
Page 2-36
Rev. H Indico 100 Series Service Manual Ch # 740895-04
2.19.2 Menu
Selections
(Cont)
GEN CONFIGURATION
Allows the service engineer to access the following functions. Further details are in chapter 3C.
•
TUBE SELECTION
Selects from the available group of X-ray tubes.
•
GENERATOR LIMITS
Sets the operating limits of the generator.
•
RECEPTOR SETUP
Allows programming of each image receptor.
•
I/O CONFIGURATION
Allows setting the inputs and outputs of all image receptors.
•
AEC SETUP
Defines properties for each channel of the AEC device.
•
AEC CALIBRATION
Allows calibration of the AEC device.
•
FLUORO SETUP
Allows setting of the fluoro properties.
•
TUBE CALIBRATION
Enables the X-ray tube auto calibration feature.
DATA LINK
Used with the CPI GenWare™ utility software. This allows for data communication with a computer in
order to download additional tube types, transfer APR data, run the A
2
EC
2
utility, and for other minor
functions. Further documentation is included with the software package in the form of an MS WORD
document (MANUAL.DOC).
A computer (i.e. laptop) and a 9 pin null modem cable with socket connectors (female) on both
ends are required to run this software and interface to the generator.