CPI Canada Inc.
Setup Information
3A
Millenia / Indico 100 Series Service Manual Ch # 740904-04 Rev. A
Page 3A-3
3A.2.2 Mains Supply And Fusing
Please record the following information on the mains voltage and current capacity. Check that the information is
appropriate for the generator according to the nameplate on the generator cabinet.
Line voltage: ________ VAC
Line frequency: 50 Hz. 60 Hz.
Line capacity:
kVa
Disconnect fuses (main): amps
3A.2.3 Automatic Exposure Control
Chamber Type (optional):
Solid State: __________________
Ion Chamber ______________
PMT _____________
Make: _______________________
Model: _________________
Receptors with AEC (optional):
Table bucky
yes
Spot film device
yes
Digital System yes
Wall bucky
yes
Auxiliary bucky
yes
3A.2.4 Collimator
Type:
__________________
Compatible
with
X-ray
tube:
yes no
Exposure interlock (dry contacts):
yes no
Tomo/stereo
by-pass:
yes no
3A.2.5 Image System
Conventional: ________________________________________ (make and model)
Digital: ______________________________________________(make and model)
Image
intensifier:
dual mode
tri-mode
24 hour supply:
__ yes
__ no
Image system park/position switch.
__ yes
__ no
Fluoro foot switch to initiate fluoro and spot exposure:
__ yes
__ no
Spot film advance delay: greater than 850 mSec. __ yes
__ no
Remote Fluoro controller.
__ yes
__ no
AEC compensation for multi-spot SFD use.
__ yes
__ no
