CPI Canada Inc.
Programming the Generator
3C
Millenia / Indico 100 Series Service Manual Ch # 740904-05 Rev. B
Page 3C-7
3C.4.0 APR EDITOR (cont)
NOTE:
APR TEXT MAY BE ALTERED BY USING A COMPUTER RUNNING THE CPI GenWare
UTILITY SOFTWARE. FURTHER DOCUMENTATION REGARDING THIS FUNCTION IS
INCLUDED WITH THE SOFTWARE PACKAGE IN THE FORM OF AN MS WORD DOCUMENT.
3C.5.0 GENERATOR CONFIGURATION
The GEN CONFIGURATION menu presents the user with 9 options as shown below. Select one of these
options to access the corresponding menu.
* GEN CONFIGURATION *
TUBE SELECTION
AEC SETUP
GENERATOR LIMITS
AEC CALIBRATION
RECEPTOR SETUP
FLUORO SETUP
I/O CONFIGURATION
TUBE CALIBRATION
EXIT
3C.5.1 Tube Selection
The TUBE SELECTION menus allow the desired tube type to be selected and assigned to TUBE 1 and to
TUBE 2 (two tube generators only), and allow setting of the default limits for that tube.
This menu will not be displayed on one-tube generators.
*TUBE SELECTION *
TUBE 1
TUBE 2
EXIT
The next three menus display the default tube selections. Selections may not be
exactly as shown.
* TUBE 1 SELECTION *
A192B 0.6/1.2
G256 0.6/1.0
A256 0.6/1.0
G292 0.6/1.2
A292 0.6/1.2
G1082 0.3/1.0
A272 0.3/0.6
RAD8 1.0/2.0
RETURN >>
* TUBE 1 SELECTION *
RAD14 0.6/1.2
RAD74 0.6/1.5
RAD21 0.6/1.2
RAD92 0.6/1.2
RAD56 0.6/1.2
DX10HS 0.6/1.0
RAD60 0.6/1.2
DX92HS 0.6/1.2
<< >>
