![background image](http://html1.mh-extra.com/html/cpi/indico-100-series/indico-100-series_service-and-installation-manual_2675023020.webp)
1B
Safety
CPI Canada Inc.
Page 1B-8 Rev. D Millenia / Indico 100 Series Service Manual Ch # 740904-01
1B.5.9 Dual Speed Starter Board
This symbol is printed on the dual speed starter board if fitted.
HIGH VOLTAGE HAZARD: Approximately 600 VDC is present on this board. This voltage is
supplied from the DC bus capacitors in the HF power supply. USE EXTREME CAUTION
WHEN SERVICING, this voltage and current combination is lethal. Ensure that the DC bus
capacitors are fully discharged before servicing as these capacitors will hold a lethal charge for
5 minutes AFTER THE EQUIPMENT IS SWITCHED OFF.
WARNING:
COMPONENTS BEHIND VARIOUS COVERS, AS NOTED IN THIS SECTION, REMAIN LIVE
EVEN WITH THE OPERATOR CONSOLE SWITCHED OFF. THE ONLY WAY TO REMOVE
POWER FROM THESE AREAS IS TO SWITCH OFF THE MAIN DISCONNECT.
1B.6.0 SAFETY LABELS / NOTICES UNIQUE TO MILLENIA
1B.6.1 HT Tank - Transformer Terminals Label
This label indicates that if the power supply inverter leads that attach to the high tension transformer
primary terminals are not connected the generator must not be energized.
This label also cautions against over tightening the nuts on the transformer feedthrough terminals
mentioned in the above paragraph.