![background image](http://html1.mh-extra.com/html/cpi/indico-100-series/indico-100-series_service-and-installation-manual_2675023230.webp)
5
Troubleshooting
CPI Canada Inc
Page 5-2 Rev. B Millenia / Indico 100 Series Service Manual Ch # 740904-09
5.2.0
STATUS AND ERROR CODES
5.2.1 Operator
Messages
These messages indicate the status of the generator. No action is required.
MESSAGE
DESCRIPTION
INITIALIZATION
Displayed during power up sequence.
SPINNING ROTOR
Displayed when prep state is active.
X-RAY READY
Displayed when generator is ready to expose
X-RAY ON
Displayed during both a rad and fluoro exposure.
5.2.2 Limit
Messages
These messages indicate that an exposure has been requested that exceeds one or more limits.
MESSAGE
PROBLEM
ACTION
TUBE KV LIMIT
Requested kV not allowed as tube kV limit
has been reached.
None.
GEN KV LIMIT
Requested kV not allowed as generator kV
limit has been reached.
None.
TUBE MA LIMIT
Requested mA not allowed as tube mA limit
has been reached.
None.
GEN MA LIMIT
Requested mA not allowed as generator mA
limit has been reached.
None.
TUBE KW LIMIT
Requested parameter not allowed as tube
kW limit has been reached.
None.
GEN KW LIMIT
Requested parameter not allowed as
generator kW limit has been reached.
None.
TUBE MAS LIMIT
Requested mAs not allowed as tube mAs
limit has been reached.
None.
GEN MAS LIMIT
Requested mAs not allowed as generator
mAs limit has been reached.
None.
GEN MS LIMIT
Requested ms not allowed as generator ms
limit has been reached.
None.
CAL LIMIT
Requested parameter not calibrated.
Recalibrate X-ray tube
or select a calibrated
parameter.
AEC DENSITY LIM
Requested density not programmed.
Select another density
or program requested
density step.
ANODE HEAT WARN
Anode has exceeded programmed warning
level.
Wait for anode to cool.
FL TIMER WARN
Fluoro interval timer
≥
5.0 mins.
Reset fluoro timer.
INVALID PARAM
Generator detected invalid parameter within
received message, message ignored.
Select valid parameter.
HOUSE HEAT WARN
X-ray tube housing heat has exceeded
housing warning limit.
Wait for housing to
cool.