Covidien Newport e360, Service Manual

Page: 65 / 154

Front Panel Assembly
Service Manual 4-5
To remove and reinstall the top cover, refer to Figure 4-2. and perform the following steps:
1.
Rotate the ventilator so the rear of the ventilator is facing you.
2.
Locate the six screws (three on each side) securing the cover to the ventilator and remove.
3.
Grab the handles on the sides of the ventilator, pull the sides away from the chassis, and slide the cover
off of the ventilator.
4.
Reinstall the top cover by reversing steps 2 and 3.
4.7
Front Panel Assembly
Figure 4-3. Front Panel Assembly
To remove and reinstall the front panel assembly, refer to Figure 4-3. and perform the following
steps:
1.
Remove the top cover by following the procedure in section 4.6 , “ Top Cover (CVR2101M) .”
2.
Locate the four screws (two on each side) securing the front panel assembly to the chassis of the
ventilator and remove.
3.
Carefully pull the front panel assembly forward and away from the ventilator chassis.
1 Screws (two of four securing front panel assembly to chassis)