Covidien Newport e360, Service Manual

Page: 62 / 154

Component Removal and Replacement
4-2 Service Manual
•
#1 Phillips screwdriver
•
#2 Phillips screwdriver
•
#1 flat screwdriver
•
5/64 in. hex key
•
7/32 in. nut driver or wrench
•
11 mm nut driver or wrench
•
Torque wrench set for 8 in.-lbs
•
Anti-static wrist strap
•
Anti-static parts bin

WARNING:
To avoid the possibility of electric shock, do not touch the power supply transformer when servicing the
ventilator.

WARNING:
These instructions are intended for use only by Covidien-trained service personnel. Do not perform any
unauthorized modifications or repairs to the ventilator or its components.

Caution:
To avoid damaging equipment, always use standard electrostatic discharge (ESD) precautions,
including an ESD wrist strap, when servicing the ventilator.

Note:
If the main board, display board, or single-board computer components are replaced, the ventilator software
must be reloaded. Follow the
Software Upgrade Procedure in section 2.10 to load software. Contact the Technical
Service Department if you need a software kit.
4.5
Exhalation Valve and Exhalation Flow Sensor
4.5.1
Valve (EXH2105A) and Flow Sensor (FLS2101P)

Caution:
The exhalation flow sensor is a precise yet delicate instrument. Take care when handling not to
disturb the measuring wires. The life cycle of the sensor is limited, and will depend on observance of