Covidien Newport e360, Service Manual

Page: 31 / 154

Maintenance Procedures
Service Manual 2-7
Figure 2-3. Exhalation Valve Adapter Replacement
To replace the exhalation valve adapter, refer to Figure 2-3. and perform the following steps:
1.
Access the exhalation valve adapter by lifting the retaining latch and removing the exhalation valve
and exhalation flow sensor (see
Figure 2-2. and Figure 2-3. ).
2.
To remove the silicone exhalation valve adapter, use your finger to grasp the adapter and pull it
straight out.
3.
To replace the exhalation valve adapter, orient the adapter lip toward the inside of the exhalation valve
housing and press into place.
4.
Confirm that the adapter is properly seated.
5.
Reinstall the exhalation valve and exhalation flow sensor.
1 Retaining latch 2 Valve adapter