Covidien Newport e360, Service Manual

Page: 84 / 154

Component Removal and Replacement
4-24 Service Manual
5.
Remove the green tubing from the bottom port of the pressure transducer (XD106) (machine 2 pressure)
on the analog board.
6.
Remove the green tubing from the exhaust port of the rezero solenoid for machine pressure 2.
7.
Remove the blue tubing from the exhalation PSOL valve (VLV1806P) and the tee connector.
8.
Remove the green tubing from the IN port of the emergency relief solenoid (SOL1501P) and the cross
tee connector.
9.
Remove the two screws and washers securing GR-BKT2105A to the ventilator.
10.
Reinstall the regulator and solenoid assembly by reversing steps 2-9.
4.17
Main Flow Outlet Block (GR-BLK2108A)
To replace the outlet block, refer to Figure 4-18. and Figure 4-19. , and perform the following steps:
1.
Remove the two screws securing DOR2112M to the front of the ventilator.
Figure 4-18. Door (DOR2112M)
2.
Remove the two screws securing BLK2108M to the ventilator.
1 Door (DOR2112M) 2 Screws