manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 87

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

87

Cisco TelePresence DX70 and DX80

API Reference Guide

xConfiguration Video Output Connector [2] CEC Mode

The HDMI output (Output Connector 2) is for future use.

USAGE:

xConfiguration Video Output Connector 

n

 CEC Mode: 

Mode

where

n

: Unique ID that identifies the video output connector. Range: 2..2

xConfiguration Video Output Connector [2] OverscanLevel

The HDMI output (Output Connector 2) is for future use.

USAGE:

xConfiguration Video Output Connector 

n

 OverscanLevel: 

OverscanLevel

where

n

: Unique ID that identifies the video output connector. Range: 2..2

xConfiguration Video Output Connector [1..2] Resolution

Connector 1: The resolution and refresh rate for the integrated display. This value is fixed and 

cannot be changed.
Connector 2: The HDMI output (Output Connector 2) is for future use.

Default value: Connector 1: 1920_1080_60

USAGE:

xConfiguration Video Output Connector 

n

 Resolution: 

Resolution

where

n

: Unique ID that identifies the video output connector. Range: 1..2

Resolution

: Connector 1: 1920_1080_60

1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.

xConfiguration Video Presentation DefaultSource

Define which video input source to use as a default presentation source. This setting may be 

used by the API and 3rd party user interfaces. It is not relevant when using the user interfaces 

provided by Cisco.

Requires user role: ADMIN, USER
Default value: 2

USAGE:

xConfiguration Video Presentation DefaultSource: 

DefaultSource

where

DefaultSource

: 2

The video input source to use as default presentation source.

xConfiguration Video Selfview Default Mode

Define if the main video source (self-view) shall be displayed on screen after a call. The position 

and size of the self-view window is determined by the Video Selfview Default PIPPosition and 

the Video Selfview Default FullscreenMode settings respectively.

Requires user role: ADMIN, INTEGRATOR
Default value: Current

USAGE:

xConfiguration Video Selfview Default Mode: 

Mode

where

Mode

: Off/Current/On
Off: self-view is switched off when leaving a call.
Current: self-view is left as is, i.e. if it was on during the call, it remains on after the call; 

if it was off during the call, it remains off after the call.
On: self-view is switched on when leaving a call.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands