Cisco TelePresence DX70 Reference Manual Download Page 12

Page: 12 / 202

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.

Cisco TelePresence DX70 and DX80

API Reference Guide

New features and improvements

New wake-up experience

The new wake-up experience introduces a

Halfwake

state,

which leads to a calmer wake-up of the system, and gives

users better guidance on how to get started.
When wake-up on motion detection is enabled the system

will automatically wake to the

Halfwake

state when people

enter the room (DX80 only). It will also wake to this state

when a user pairs a Cisco Proximity client to the system (both

DX70 and DX80).

Bluetooth headset support

A Bluetooth headset can be used with the video system. The

headset must support HFP (Hands Free Protocol). The user

can enable Bluetooth and set the video system in Bluetooth

pairing mode from the user interface.

Support for the EAP authentication framework for wireless

networks

In addition to WPA-PSK and WPA2-PSK, the video system

now supports the WPA-EAP authentication framework

for Wi-Fi connections. In total the following methods are

supported:

•  Open
•  WPA-PSK (AES)
•  WPA2-PSK (AES)
•  EAP-TLS
•  EAP-TTLS
•  EAP-FAST
•  PEAP
•  EAP-MSCHAPv2
•  EAP-GTC

Network port 2 can be disabled

You can connect a computer to the network through the

video system’s second network port. Then you only need one

network wall socket to support both the video system and the

computer.
For security reasons, we recommend that you disable

this network port if the video system is used in a public

environment. This way, you prevent someone from

connecting a computer to your network through the video

system.

What’s new in CE9.1

This section provides an overview of the new and changed

system settings, and the new features and improvements

in the Cisco Collaboration Endpoint software version 9.1

(CE9.1) compared to CE9.0.
For more details, we recommend reading the Software

release notes:



http://www.cisco.com/c/en/us/support/collaboration-

endpoints/dx70/model.html#ReleaseNotes



http://www.cisco.com/c/en/us/support/collaboration-

endpoints/dx80/model.html#ReleaseNotes

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



Introduction

Summary of Contents for TelePresence DX70











































































































































































































Search results

Summary of Contents for TelePresence DX70

Reviews:

Brands by name

Popular brands

Cisco TelePresence DX70, Reference Manual

Search results

Summary of Contents for TelePresence DX70

Reviews:

Brands by name

Popular brands