Cisco TelePresence DX70 Reference Manual Download Page 52

Page: 52 / 202

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.

Cisco TelePresence DX70 and DX80

API Reference Guide

xConfiguration Network [1] IEEE8021X UseClientCertificate

Authentication using a private key/certificate pair during an IEEE802.1x connection. The authen-

tication X.509 certificate must be uploaded to the video system. This can be done from the

web interface.

Requires user role: ADMIN, USER
Default value: Off

USAGE:

xConfiguration Network

IEEE8021X UseClientCertificate:

UseClientCertificate

where

: Index that identifies the network. Range: 1..1

UseClientCertificate

: Off/On

Off: When set to Off client-side authentication is not used (only server-side).
On: When set to On the client (video system) will perform a mutual authentication TLS

handshake with the server.

xConfiguration Network [1] IEEE8021X Identity

Define the user name for 802.1X authentication.

Requires user role: ADMIN, USER
Default value: ""

USAGE:

xConfiguration Network

IEEE8021X Identity: "

Identity

where

: Index that identifies the network. Range: 1..1

Identity

: String (0, 64)

The user name for 802.1X authentication.

xConfiguration Network [1] IEEE8021X Password

Define the password for 802.1X authentication.

Requires user role: ADMIN, USER
Default value: ""

USAGE:

xConfiguration Network

IEEE8021X Password: "

Password

where

: Index that identifies the network. Range: 1..1

Password

: String (0, 50)

The password for 802.1X authentication.

xConfiguration Network [1] IEEE8021X AnonymousIdentity

The 802.1X Anonymous ID string is to be used as unencrypted identity with EAP (Extensible

Authentication Protocol) types that support different tunneled identity, like EAP-PEAP and

EAP-TTLS. If set, the anonymous ID will be used for the initial (unencrypted) EAP Identity

Request.

Requires user role: ADMIN, USER
Default value: ""

USAGE:

xConfiguration Network

IEEE8021X AnonymousIdentity: "

AnonymousIdentity

where

: Index that identifies the network. Range: 1..1

AnonymousIdentity

: String (0, 64)

The 802.1X Anonymous ID string.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus



xConfiguration

Summary of Contents for TelePresence DX70











































































































































































































Search results

Summary of Contents for TelePresence DX70

Reviews:

Brands by name

Popular brands

Cisco TelePresence DX70, Reference Manual

Search results

Summary of Contents for TelePresence DX70

Reviews:

Brands by name

Popular brands