manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 61

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

61

Cisco TelePresence DX70 and DX80

API Reference Guide

NetworkPort configuration

xConfiguration NetworkPort [2] Mode

The video system has two network ports. The first network port is for connecting the video 

system to Ethernet LAN. The second network port (also called the computer network port) 

allows you to connect a computer to the Ethernet LAN via the video system. In this way, you 

only need one network wall socket to support both the video system and the computer.

If the video system is used in a public environment we recommend that you disable this 

network port, to prevent people from connecting a computer to your network through the video 

system.

You have to restart the video system for any change to this setting to take effect.

Requires user role: ADMIN
Default value: On

USAGE:

xConfiguration NetworkPort 

n

 Mode: 

Mode

where

n

: Unique ID that identifies the network port Range: 2..2

Mode

: Off/On
Off: The computer network port is disabled.
On: The computer network port is available for use.

NetworkServices configuration

xConfiguration NetworkServices CDP Mode

Enable or disable the CDP (Cisco Discovery Protocol) daemon. Enabling CDP will make the 

endpoint report certain statistics and device identifiers to a CDP-enabled switch. If CDP is 

disabled, the Network VLAN Voice Mode: Auto setting will not work.

Requires user role: ADMIN
Default value: On

USAGE:

xConfiguration NetworkServices CDP Mode: 

Mode

where

Mode

: Off/On
Off: The CDP daemon is disabled.
On: The CDP daemon is enabled.

xConfiguration NetworkServices H323 Mode

Define whether the system should be able to place and receive H.323 calls or not.

Requires user role: ADMIN
Default value: Off

USAGE:

xConfiguration NetworkServices H323 Mode: 

Mode

where

Mode

: Off/On
Off: Disable the possibility to place and receive H.323 calls.
On: Enable the possibility to place and receive H.323 calls (default).

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands