manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 102

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

102

Cisco TelePresence DX70 and DX80

API Reference Guide

xCommand Call Hold

Put a call on hold.

Requires user role: ADMIN, USER

USAGE:

 

xCommand Call Hold [CallId: 

CallId

] [Reason: 

Reason

] 

where

CallId

: Integer (0..65534)

The CallID is returned when the xCommand Dial command is run. During a call you can 

run the xStatus Call command to see the CallId. The default is set to 0.

Reason

: Conference/Transfer/Other

Internal usage only. The default is set to Other.

xCommand Call Ignore

Turns off the ringtone for the incoming call. The call can still be answered.

Requires user role: ADMIN, USER

USAGE:

 

xCommand Call Ignore CallId: 

CallId

 

where

CallId

: Integer (0..65534)

The CallID is returned when the xCommand Dial command is run. During a call you can 

run the xStatus Call command to see the CallId.

xCommand Call Join

Internal usage only.

Requires user role: ADMIN, USER

USAGE:

 

xCommand Call Join CallId: 

CallId

 

where

CallId

: Integer (0..65534)

You can have from 1 to 10 CallId parameters in the same command.

xCommand Call Reject

Reject incoming call. If no call id is specified, all incoming calls are rejected.

Requires user role: ADMIN, USER

USAGE:

 

xCommand Call Reject [CallId: 

CallId

] 

where

CallId

: Integer (0..65534)

The CallID is returned when the xCommand Dial command is run. During a call you can 

run the xStatus Call command to see the CallId. The default is set to 0.

xCommand Call Resume

Resume a call that have been put on hold.

Requires user role: ADMIN, USER

USAGE:

 

xCommand Call Resume [CallId: 

CallId

] 

where

CallId

: Integer (0..65534)

The CallID is returned when the xCommand Dial command is run. During a call you can 

run the xStatus Call command to see the CallId. The default is set to 0.

xCommand Call UnattendedTransfer

Transfers an ongoing call to another participant. Fully supported for SIP calls only.

Requires user role: ADMIN, USER

USAGE:

 

xCommand Call UnattendedTransfer CallId: 

CallId

 Number: "

Number

" 

where

CallId

: Integer (0..65534)

The CallID is returned when the xCommand Dial command is run. During a call you can 

run the xStatus Call command to see the CallId.

Number

: String (0, 255)

The number the call is transfered to.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xCommand

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands