manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 177

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

177

Cisco TelePresence DX70 and DX80

API Reference Guide

xStatus Provisioning Status

Shows the status of the provisioning.
Failed: The provisioning failed.
AuthenticationFailed: The authentication failed.
Provisioned: The endpoint is provisioned.
Idle: The provisioning is not active.
NeedConfig: The endpoint needs to be configured.
ConfigError: An error occurred during configuration.

Requires user role: ADMIN, USER

Value space of the result returned: 

Failed/AuthenticationFailed/Provisioned/Idle/NeedConfig/ConfigError

Example:

 

xStatus Provisioning Status

*s Provisioning Status: Provisioned

** end

Proximity status

xStatus Proximity Services Availability

Shows whether proximity services are available on the endpoint. 
Available: Proximity mode has been enabled with the command xConfiguration Proximity Mode 

and one or more of the proximity services have been enabled with xConfiguration Proximity 

Services commands. 
Disabled: Proximity mode has been disabled with xConfiguration Proximity Mode, or none of the 

services have been enabled with the xConfiguration Proximity Services commands.
Deactivated: Proximity services have been deactivated with the command xCommand Proximity 

Services Deactivate.

Requires user role: ADMIN, USER

Example:

 

xStatus Proximity Services Availability

*s Proximity Services Availability: Disabled

** end

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xStatus

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands