manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 135

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

135

Cisco TelePresence DX70 and DX80

API Reference Guide

xCommand UserManagement RemoteSupportUser GetState

Retrieves the state of the generated remote support user, if one exists.

Requires user role: ADMIN

USAGE:

 

xCommand UserManagement RemoteSupportUser GetState 

xCommand UserManagement User Add

Adds a new user to this device.

Requires user role: ADMIN

USAGE:

 

xCommand UserManagement User Add [Active: 

Active

] [ClientCertificateDN: 

"

ClientCertificateDN

"] [Passphrase: "

Passphrase

"] [PassphraseChangeRequired: 

PassphraseChangeRequired

] [PinChangeRequired: 

PinChangeRequired

] [Role: 

Role

] 

[ShellLogin: 

ShellLogin

] Username: "Username" [YourPassphrase: "YourPassphrase"] 

where

Active

: Literal (False / True)

Specifies whether this is an active user or not.

ClientCertificateDN

: String (0..255)

Identifies a user who logs in with a client certificate instead of a username and 

password.

Passphrase

: String (0..255)

Specifies a Passphrase for the user.

PassphraseChangeRequired

: Literal (False / True)

Specifies whether the user’s passphrase requires changing or not.

PinChangeRequired

: Literal (False / True)

Specifies whether a user’s PIN requires changing or not.

Role

: Literal (Admin / Audit / Integrator / RoomControl / User )
Sets the user’s role.

ShellLogin

: Literal (False / True)

Specifies whether the user should have a shell login or not.

Username

: String (0..127)

Specifies the user’s username.

YourPassphrase

: String (0..255)

The user’s passphrase.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xCommand

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands