manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 80

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

80

Cisco TelePresence DX70 and DX80

API Reference Guide

xConfiguration UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when typing text 

or numbers.

Requires user role: ADMIN, USER
Default value: Off

USAGE:

xConfiguration UserInterface KeyTones Mode: 

Mode

where

Mode

: Off/On
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.

xConfiguration UserInterface Language

Select the language to be used in menus and messages on the screen. If the language is not 

supported, the default language (English) will be used.

Requires user role: ADMIN, USER
Default value: English

USAGE:

xConfiguration UserInterface Language: 

Language

where

Language

: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/English/

EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/Japanese/

Korean/Norwegian/Polish/Portuguese/PortugueseBrazilian/Russian/Spanish/SpanishLatin/

Swedish/Turkish

Select a language from the list.

xConfiguration UserInterface OSD HalfwakeMessage

A custom message can be displayed in the middle of the main screen when the system is in 

the half wake state. This will replace the default message "Tap the touch panel to get started" 

together with an illustration of a Touch panel. You can also choose not to have a message.

Requires user role: ADMIN
Default value: ""

USAGE:

xConfiguration UserInterface OSD HalfwakeMessage: "

HalfwakeMessage

"

where

HalfwakeMessage

: String (0..128)

Add a custom message. If you add a space, there will be no visible message. Add an 

empty string to remove a custom message.

xConfiguration UserInterface OSD Output

Define on which monitor the on-screen menus, information and indicators (OSD) should be 

displayed. The system supports only one monitor, so this value is fixed and cannot be changed.

Requires user role: ADMIN, INTEGRATOR
Default value: Auto

USAGE:

xConfiguration UserInterface OSD Output: 

Output

where

Output

: Auto

Auto: The system sends the on-screen information and indicators to the system's 

integrated display.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands