manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 158

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

158

Cisco TelePresence DX70 and DX80

API Reference Guide

xStatus Conference DoNotDisturb

Shows whether DoNotDisturb mode is switched on or not.

Requires user role: ADMIN, INTEGRATOR, USER

Value space of the result returned: 

Active/Inactive

Example:

 

xStatus Conference DoNotDisturb

*s Conference DoNotDisturb: Inactive

** end

xStatus Conference Line [n] Mode

Indicates whether the system is configured as private or shared line on CUCM.

Requires user role: ADMIN, USER

Value space of the result returned: 

Shared/Private

Example:

 

xStatus Conference Line Mode

*s Conference Line 1 Mode: Private

** end

xStatus Conference Multipoint Mode

Shows how the Multipoint video conferences are handled.
Auto: The multipoint method available will be choosen automatically; if none are available the
Multipoint Mode will automatically be set to Off. If both MultiWay and MultiSite are available, the 

MultiWay service takes priority over the built-in MultiSite.
Off: Multiparty conferences are not allowed.
MultiSite: Multiparty conferences are set up using the built-in MultiSite feature. If MultiSite is 

chosen when the MultiSite feature is not available, the Multipoint Mode will automatically be set 

to Off.
CUCMMediaResourceGroupList: Multiparty conferences (ad hoc conferences) are hosted by 

the CUCM configured conference bridge. This setting is provisioned by CUCM in a CUCM 

environment and should never be set manually by the user.

Requires user role: ADMIN, USER

Value space of the result returned: 

Auto/CUCMMediaResourceGroupList/MultiSite/Off

Example:

 

xStatus Conference Multipoint Mode

*s Conference Multipoint Mode: "Auto"

** end

xStatus Conference Presentation CallId

Shows the identity of the system that sends the presentation.

Requires user role: ADMIN, INTEGRATOR, USER, ROOMCONTROL

Value space of the result returned: 

Integer

Example:

 

xStatus Conference Presentation CallId

*s Conference Presentation CallId: 0

** end

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xStatus

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands