manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 133

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

133

Cisco TelePresence DX70 and DX80

API Reference Guide

xCommand UserInterface Presentation ExternalSource List

Returns the current list of external input sources.

Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL

USAGE:

 

xCommand UserInterface Presentation ExternalSource List 

xCommand UserInterface Presentation ExternalSource Remove

Remove the input source (specified by the SourceIdentifier) from the list of external input 

sources.

Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL

USAGE:

 

xCommand UserInterface Presentation ExternalSource Remove SourceIdentifier: 

"

SourceIdentifier

" 

where

SourceIdentifier

: String (0, 40)

The unique string that identifies this input source. It was defined when the source was 

created with the UserInterface Presentation ExternalSource Add command.

xCommand UserInterface Presentation ExternalSource RemoveAll

Remove all input sources from the list of external input sources.

Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL

USAGE:

 

xCommand UserInterface Presentation ExternalSource RemoveAll 

xCommand UserInterface Presentation ExternalSource Select

Starts to present the input source (specified by the SourceIdentifier) if it is in Ready state (see 

the UserInterface Presentation ExternalSource State Set command). The input source will be 

shown in the user interface sharetray as "Presenting".

Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER

USAGE:

 

xCommand UserInterface Presentation ExternalSource Select SourceIdentifier: 

"

SourceIdentifier

" 

where

SourceIdentifier

: String (0, 40)

The unique string that identifies this input source. It was defined when the source was 

created with the UserInterface Presentation ExternalSource Add command.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xCommand

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands