manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 72

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

72

Cisco TelePresence DX70 and DX80

API Reference Guide

xConfiguration Proximity Services ContentShare FromClients

Enable or disable content sharing from Proximity clients. When this setting is enabled, you can 

share content from a Proximity client wirelessly on the video system, e.g. share your laptop 

screen. This service is supported by laptops (OS X and Windows). Proximity Mode must be On 

for this setting to take any effect.

Requires user role: ADMIN, USER
Default value: Enabled

USAGE:

xConfiguration Proximity Services ContentShare FromClients: 

FromClients

where

FromClients

: Enabled/Disabled

Enabled: Content sharing from a Proximity client is enabled.
Disabled: Content sharing from a Proximity client is disabled.

xConfiguration Proximity Services ContentShare ToClients

Enable or disable content sharing to Proximity clients. When enabled, Proximity clients will 

receive the presentation from the video system. You can zoom in on details, view previous 

content and take snapshots. This service is supported by mobile devices (iOS and Android). 

Proximity Mode must be On for this setting to take any effect.

Requires user role: ADMIN, USER
Default value: Disabled

USAGE:

xConfiguration Proximity Services ContentShare ToClients: 

ToClients

where

ToClients

: Enabled/Disabled

Enabled: Content sharing to a Proximity client is enabled.
Disabled: Content sharing to a Proximity client is disabled.

SerialPort configuration

xConfiguration SerialPort Mode

Enable/disable the serial port (connection via Micro USB to USB cable). The serial port uses 

115200 bps, 8 data bits, no parity and 1 stop bit.

Requires user role: ADMIN, INTEGRATOR
Default value: On

USAGE:

xConfiguration SerialPort Mode: 

Mode

where

Mode

: Off/On
Off: Disable the serial port.
On: Enable the serial port.

xConfiguration SerialPort LoginRequired

Define if login shall be required when connecting to the serial port.

Requires user role: ADMIN
Default value: On

USAGE:

xConfiguration SerialPort LoginRequired: 

LoginRequired

where

LoginRequired

: Off/On

Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xConfiguration

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands