D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
47
Cisco TelePresence DX70 and DX80
API Reference Guide
xConfiguration Conference MaxTotalReceiveCallRate
Define the maximum overall receive bit rate allowed. This product does not support multiple
simultaneous calls, so the total receive call rate will be the same as the receive bit rate for one
call (ref. Conference MaxReceiveCallRate setting).
Requires user role: ADMIN
Default value: 3072
USAGE:
xConfiguration Conference MaxTotalReceiveCallRate:
MaxTotalReceiveCallRate
where
MaxTotalReceiveCallRate
: Integer (64..3072)
The maximum receive call rate (kbps).
xConfiguration Conference MaxTotalTransmitCallRate
Define the maximum overall transmit bit rate allowed. This product does not support multiple
simultaneous calls, so the total transmit call rate will be the same as the transmit bit rate for one
call (ref. Conference MaxTransmitCallRate setting).
Requires user role: ADMIN
Default value: 3072
USAGE:
xConfiguration Conference MaxTotalTransmitCallRate:
MaxTotalTransmitCallRate
where
MaxTotalTransmitCallRate
: Integer (64..3072)
The maximum transmit call rate (kbps).
H323 configuration
xConfiguration H323 Authentication Mode
Define the authenticatin mode for the H.323 profile.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration H323 Authentication Mode:
Mode
where
Mode
: Off/On
Off: The system will not try to authenticate itself to a H.323 Gatekeeper, but will still try
a normal registration.
On: If an H.323 Gatekeeper indicates that it requires authentication, the system will try
to authenticate itself to the gatekeeper. Requires the H323 Authentication LoginName
and H323 Authentication Password settings to be defined on both the codec and the
Gatekeeper.
xConfiguration H323 Authentication LoginName
The system sends the H323 Authentication Login Name and the H323 Authentication Password
to an H.323 Gatekeeper for authentication. The authentication is a one way authentication from
the codec to the H.323 Gatekeeper, i.e. the system is authenticated to the gatekeeper. If the
H.323 Gatekeeper indicates that no authentication is required, the system will still try to register.
Requires the H.323 Authentication Mode to be enabled.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration H323 Authentication LoginName: "
LoginName
"
where
LoginName
: String (0, 50)
The authentication login name.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration
