manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 122

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

122

Cisco TelePresence DX70 and DX80

API Reference Guide

xCommand Security Persistency

Set the following features to persistent or non-persistent mode. In non-persistent mode 

the information gathered by the specified feature does not persist a reboot of the system. 

Persistent mode is the default. This command reboots the system.

Requires user role: ADMIN

USAGE:

 

xCommand Security Persistency Configurations: 

Configurations

 CallHistory: 

CallHistory

 InternalLogging: 

InternalLogging

 LocalPhonebook: 

LocalPhonebook

 

DHCP: 

DHCP

 ConfirmAndReboot: 

ConfirmAndReboot

 

where

Configurations

: NonPersistent/Persistent

In non-persistent mode, all configurations are set back to default when the system 

reboots.

CallHistory

: NonPersistent/Persistent

In non-persistent mode call history is deleted when the system reboots.

InternalLogging

: NonPersistent/Persistent

In non-persistent mode eventlog is deleted when the system reboots.

LocalPhonebook

: NonPersistent/Persistent

In non-persistent mode local phone book is deleted when the system reboots.

DHCP

: NonPersistent/Persistent

In non-persistent mode all IP related information is deleted when the system reboots.

ConfirmAndReboot

: Yes

Reboots the system.

xCommand Security Session List

List active sessions.

Requires user role: ADMIN, USER

USAGE:

 

xCommand Security Session List 

xCommand Security Session Terminate

Terminate a session.

Requires user role: ADMIN, USER

USAGE:

 

xCommand Security Session Terminate SessionId: "

SessionId

" 

where

SessionId

: String (0, 32)

The session ID number.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xCommand

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands