manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 104

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

104

Cisco TelePresence DX70 and DX80

API Reference Guide

xCommand CallHistory Get

Retrieve all information on previous calls made on the video system.

Requires user role: ADMIN, USER

USAGE:

 

xCommand CallHistory Get [Filter: 

Filter

] [Offset: 

Offset

] [Limit: 

Limit

] 

[DetailLevel: 

DetailLevel

] [SearchString: "

SearchString

"] [CallHistoryId: 

CallHistoryId

] 

where

Filter

: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/

UnacknowledgedMissed

You can filter which calls to retrieve. The default is set to All.

Offset

: Integer (0..65534)

Sets the call from which to start. The default is set to 0.

Limit

: Integer (0..65534)

Defines the amount of calls in the output. The default is set to 65534.

DetailLevel

: Basic/Full

Sets the level of detail for the information on these calls. The default is set to Basic.

SearchString

: String ( 0, 255)

Allows you to set the command to apply to a specified display name or call back 

number.

CallHistoryId

: Integer (0..65534)

CallHistoryId for the call in question.

xCommand CallHistory Recents

Retrieve aggregated information on previous calls made on the video system.

Requires user role: ADMIN, USER

USAGE:

 

xCommand CallHistory Recents [Filter: 

Filter

] [Offset: 

Offset

] [Limit: 

Limit

] 

[DetailLevel: 

DetailLevel

] [SearchString: "

SearchString

"] [CallHistoryId: 

CallHistoryId

] [Order: 

Order

] 

where

Filter

: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/

UnacknowledgedMissed

You can filter which calls to retrieve. The default is set to All.

Offset

: Integer (0..65534)

Sets the call from which to start. The default is set to 0.

Limit

: Integer (0..65534)

Defines the amount of calls in the output. The default is set to 65534.

DetailLevel

: Basic/Full

Sets the level of detail for the information on these calls. The default is set to Basic.

SearchString

: String (0, 255)

Allows you to set the command to apply to a specified display name or call back 

number.

CallHistoryId

: Integer (0..65534)

CallHistoryId for the call in question.

Order

: OccurrenceTime/OccurrenceFrequency

Define the order in which the previous calls are presented. The default is set to 

OccurenceTime.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xCommand

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands