D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
4
Cisco TelePresence DX70 and DX80
API Reference Guide
About this guide
This guide introduces you to the Application Programmer
Interface (API) for the Collaboration Endpoint software, and
serves as a reference guide for the command line commands
for the following product:
• Cisco TelePresence DX70 and DX80
The guide describes the API for on-premise registered video
systems (CUCM, VCS) as well as video systems registered
to Cisco’s cloud service (Cisco Spark). For Cisco Spark
registered systems only a subset of the API is available, and
the user role (integrator and roomcontrol) of the local user
determines which commands are available.
Software migration to CE software
From Cisco Collaboration Endpoint software version 8.2
(CE8.2) all DX80 and DX70 units can run
CE software
, which
is the same software that runs on the Cisco TelePresence SX,
MX and Room Kit Series.
Cisco DX80 and Cisco DX70 were originally shipped with
Android based
software
. Before migrating to
CE software
, it is
important to carefully consider the conversion requirements
and the functionality changes compared to
Android
based software
; otherwise migration can leave you with a
non-functional deployment that requires you to convert back.
Refer to the software release notes, and the Administrator
Guide for further details.
Downloading the user documentation
You can download the user documentation from the Cisco
web site, go to:
http://www.cisco.com/go/dx-docs
For Spark registred systems, go to:
https://support.ciscospark.com
Guidelines for how to find the documentation on the Cisco
web site are included in the
appendix.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
Introduction
