D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
44
Cisco TelePresence DX70 and DX80
API Reference Guide
xConfiguration Audio Input MicrophoneMode
This setting applies only to DX80.
The DX80 has microphones in both legs. If you set the microphone mode to Focused, the
microphones can be combined to focus sound sensitivity. As a result, the noise in the room is
suppressed, and you can be heard better when sitting right in front of the video system. The
voice of people not sitting right in front of the system will be suppressed.
If you set the microphone mode to Wide, the system behaves like any other system. The voice
of people sitting beside you will be heard, and also more noise from the room.
We recommend that you use Focused mode when you are the only speaker. Use Wide mode
when several speakers are in front of the system.
Requires user role: ADMIN, INTEGRATOR
Default value: Wide
USAGE:
xConfiguration Audio Input MicrophoneMode:
MicrophoneMode
where
MicrophoneMode
: Focused/Wide
Focused: Focused sound sensitivity, suppressing sound from sources that are not right
in front of the video system.
Wide: Default microphone operation with normal sound sensitivity.
xConfiguration Audio Ultrasound MaxVolume
This setting applies to the Intelligent Proximity feature. Set the maximum volume of the ultra-
sound pairing message.
Requires user role: ADMIN, INTEGRATOR
Default value: DX80: 70 DX70: 60
USAGE:
xConfiguration Audio Ultrasound MaxVolume:
MaxVolume
where
MaxVolume
: DX80: Integer (0..90) DX70: Integer (0..60)
Select a value in the specified range. If set to 0, the ultrasound is switched off.
Conference configuration
xConfiguration Conference AutoAnswer Mode
Define the auto answer mode. Use the Conference AutoAnswer Delay setting if you want
the system to wait a number of seconds before answering the call, and use the Conference
AutoAnswer Mute setting if you want your microphone to be muted when the call is answered.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Conference AutoAnswer Mode:
Mode
where
Mode
: Off/On
Off: You must answer incomming calls manually by tapping Answer.
On: The system automatically answers incoming calls, except if you are already in a
call. You must always answer or decline incoming calls manually when you are already
engaged in a call.
xConfiguration Conference AutoAnswer Mute
Define if the microphone shall be muted when an incoming call is automatically answered.
Requires that AutoAnswer Mode is switched on.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration Conference AutoAnswer Mute:
Mute
where
Mute
: Off/On
Off: The incoming call will not be muted.
On: The incoming call will be muted when automatically answered.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xConfiguration
