manualshive.com logo in svg

Cisco TelePresence DX70, Reference Manual

Share
Download
Cisco TelePresence DX70 Reference Manual Download Page 103

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017. 

Copyright © 2017 Cisco Systems, Inc. All rights reserved. 

103

Cisco TelePresence DX70 and DX80

API Reference Guide

CallHistory commands

xCommand CallHistory AcknowledgeAllMissedCalls

Turns off the missed calls indicator on the touch controller for all missed calls.

Requires user role: ADMIN, USER

USAGE:

 

xCommand CallHistory AcknowledgeAllMissedCalls 

xCommand CallHistory AcknowledgeMissedCall

Turns off the missed calls indicator on the touch controller for the specified call.

Requires user role: ADMIN, USER

USAGE:

 

xCommand CallHistory AcknowledgeMissedCall CallHistoryId: 

CallHistoryId

 

[AcknowledgeConsecutiveDuplicates: 

AcknowledgeConsecutiveDuplicates

] 

where

CallHistoryId

: Integer (1..2147483647)

CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id 

number.

AcknowledgeConsecutiveDuplicates

: False/True

You can include or exclude all surrounding calls with duplicate information. The default 

is set to False.

xCommand CallHistory DeleteAll

Deletes all information on previous calls.

Requires user role: ADMIN, USER

USAGE:

 

xCommand CallHistory DeleteAll [Filter: 

Filter

] 

where

Filter

: All/Missed/Placed/Received

You can filter which calls to delete. The default is set to All.

xCommand CallHistory DeleteEntry

Deletes all information on the specified call.

Requires user role: ADMIN, USER

USAGE:

 

xCommand CallHistory DeleteEntry CallHistoryId: 

CallHistoryId

 

[AcknowledgeConsecutiveDuplicates: 

AcknowledgeConsecutiveDuplicates

] 

[DeleteConsecutiveDuplicates: 

DeleteConsecutiveDuplicates

] 

where

CallHistoryId

: Integer (1..2147483647)

CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id 

number.

AcknowledgeConsecutiveDuplicates

: False/True

You can include or exclude all surrounding calls with duplicate information.

DeleteConsecutiveDuplicates

: False/True

You can delete the surrounding calls with duplicate information or not. The default is set 

to False.

Introduction

About the API

xConfiguration

Appendices

xCommand

xStatus

xCommand

Summary of Contents for TelePresence DX70











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands