Setup Menu
131
Menu Item
Description
Parameters
Signal Lock Timer
Select the time, in seconds, the unit must
wait for a signal lock before declaring that
the signal is not usable and move on to the
next search location in the search path. The
default is 30 seconds.
5 to 255 seconds
Verify Timer
Select the time, in seconds, the unit must
wait for the PAT table to verify the signal
has a valid transport. The default is 60
seconds.
10 to 255 seconds
Backup Channel
Menu Item
Description
Parameters
PE #
The Program Entry (PE) number you are
configuring the backup transport channel.
PE1 to PE32
Transport
The backup transport number you are
configuring the backup channel.
1, 2, or 3
Backup Channel
The backup channel number for the
selected backup transport.
Note:
We recommend that you configure a minimum of one backup transport. If no backup
transport is configured, an alarm is triggered, but the unit will not be able to switch to a
backup transport.
Backup Transport
Menu Item
Description
Parameters
Backup
The backup number
1, 2, or 3
Active
Indicates whether the selected backup is
enabled.
To activate a backup, press the
ADV
key
and press
SELECT
to insert. The Active
menu for the selected backup number
changes from No to Yes. Press
APPLY
to
save the changes.
To disable a backup, press the
ADV
key
and press the
RIGHT
arrow once and
press
SELECT
to select Delete. Press the
RIGHT
arrow once and press
SELECT
to
select Continue. The Active menu for the
selected backup number changes from Yes
to No.
Yes or No
Summary of Contents for D9824
