Cisco D9824, Installation And Configuration Manual

Page: 355 / 416

333
Warning Message
Type Message Cause/Remedy Description ID
ECT Timeout # Set ECT # is lost Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning.
If the problem persists,
determine if uplink is
sending the current SI
information table.
Disable the warning if
not using the table.
No longer receiving
Event Control Table. 77200
ECT Timeout # Clear ECT fault cleared – – 77200
Memory Usage
Host Set Excessive
(stack/partition)
memory usage
Cause: Possible software
issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
SW exceeding
allowable memory
usage.
78000
Memory Usage
Host Clear Normal
(stack/partition)
memory usage
– – 78000
Memory Usage
Secondary Set Excessive
(stack/partition)
memory usage
Cause: Possible software
issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
Software exceeding
allowable memory
usage.
79000
Memory Usage
Secondary Clear Normal
(stack/partition)
memory usage – – 79000
FPGA Code
Version Set FPGA newer
than SW,
Supported=AAA,
Running=BBB
Cause: FPGA version is
incompatible with the
software.
Remedy: Select alternate
FPGA, software
versions, reset unit,
notify Cisco Services if
the problem persists.
FPGA version is
incompatible with
currently operating
software. You may
encounter operational
difficulties
80000
FPGA Code
Version Clear FPGA code ver
OK – – 80000