Cisco D9824, Installation And Configuration Manual

Page: 74 / 416

Chapter 4 Front Panel Operation
52
Menu Item Description Parameters
NetID Indicates the Network ID of the uplink
signal the receiver is to receive when
using the selected preset. The receiver’s
Network ID must match the Network
ID associated with the transmitted
signal that identifies the NIT to be used.
Note: Each network must be assigned a
unique ID (number).
1 to 65535
TxID Indicates the Transport ID. 1 to 65535
LNB Stat Indicates the current Low Noise Block
(LNB) connection status. No Load, Over Loaded, Over
Temperature, Short Circuit,
Disabled, Normal or N/A
Polar Indicates the polarity of the LNB Power
supply. Off, 13V, or 18V
LO Select Indicates whether a 22 kHz tone is
available on input port RF1. This is
applicable for dual-band applications.
On or Off
Program PIDs
Menu Item Description Parameters
PE Select the Program Entry to view. PE1 to PE32
Stream Indicates the name assigned to the
Program Entry. Up to 4 alphanumeric
characters
Detail Indicates any detail associated with
the program PID (e.g., MPG2 PID). MPG1 VID, MPG2 VID, 422
VID, H264 VID, HD VID, MPG4
VID, MPG AUD, MPG2 AUD,
DVB AC3, DVB DDP, AAC
AUD, HEAAC, AUD, MPG4
AUD, DBE AUD, DTS AUD,
DVB TXT, DVB VBI, DVB
SUBT, DVB ASYN, DVB SYNS,
DVB SYND, DVB MPE, DVB
DCAR, DVB OCAR, SA VBI,
ATSC AC3, ATSC DDP, SA
UTLD, SCTE DPI, SA HSD, SA
CDDL, SA WBD, SA SUBT,
ECM, EMM, PCR, or
UNKNOWN
PID Indicates the program PID number. 1 to 8191
Present Indicates whether the PID is present
in the incoming stream. Yes or No