Chapter 5 Web GUI Setup and Monitoring
226
3
From the
Enable Fixed Output
drop-down list, choose
Yes
for the DPM to assign
new values for all the output channels and PIDs according to the Fixed Output
Options table when you Resynchronize All. Click
Fixed Output Options
to
configure the MoIP Fixed Output Options:
a
From the
Use Input Channel Numbers
drop-down list, choose
Yes
to use the
input channel numbers. Otherwise, choose
No
(default) to use the first
channel and channel offset assigned below.
i
In the
First Channel Number
field, enter the first PE channel number to
use. By default, the channel is set to 1.
ii
In the
Channel Numbers Offset
field, enter the subsequent PE channel
numbers. For example, if the First Channel Number is set to 100 and the
Channel Numbers Offset is set to 10, then the first channel number is 100,
and the second channel number is 110.
b
From the
Use Input PMT PID Numbers
drop-down list, choose
Yes
to use
the input PMT PID number. Otherwise, choose
No
(default) to use the first
PE PID number and PID offset number assigned below.
i
In the
First Channel First ES PID Number
field, enter the first PE PMT
PID number. The default is 1701.
ii
In the
PMT PID Numbers Offset
field, enter the offset of the subsequent
PE PMT PID numbers. For example, if the First Channel First ES PID
Number is set to 1701 and the PMT PID Numbers Offset is set to 1, then
the first PMT PID number is 1701, and the second PMT PID number is
1702.
c
From the
Use Input ES PID Numbers
drop-down list, choose
Yes
to use the
input ES PID number. Otherwise, choose
No
(default) to use the first ES PID
number and the ES PID offset number assigned below.
i
In the
First Channel First ES PID Number
field, enter the first ES PID
number. The default is 101.
Summary of Contents for D9824
