Cisco D9824 Installation And Configuration Manual Download Page 294

Page: 294 / 416

Chapter 5 Web GUI Setup and Monitoring

272

Note:

The

Enter New Password

and

Re-enter New Password

fields should be

identical. Each user, including the admin user, can only modify their own
password.

Click

Apply

To Add a User Account

Note:

This feature is available to a user with Admin privileges only.

From the Account Management page, click the

Manage User Logins

link. The

Click

Add Account Login

to create a new login account.

Note:

You can create a maximum of 10 user accounts.

The Add Login Account window is displayed.

Summary of Contents for D9824

































































































































































































































































































































































































































Search results

Summary of Contents for D9824

Reviews:

Related manuals for D9824

Brands by name

Popular brands

Cisco D9824, Installation And Configuration Manual

Search results

Summary of Contents for D9824

Reviews:

Related manuals for D9824

Brands by name

Popular brands