Configuring System Settings
271
Password Complexity
Description
Minimal Checking
A password must comply with the following
requirements:
It cannot contain username or reversed
username.
It cannot contain any of the following strings:
cisco, sciatl, ocsic, ltaics, atlsci, icslta, or any
string achieved by full or partial capitalization
of letters.
No letter is repeated more than three times in a
row.
Must contain a minimum of four characters.
Full Complexity Checking
A password must comply with the following
requirements:
It cannot contain username or reversed
username.
It cannot contain any of the following strings:
cisco, sciatl, ocsic, ltaics, atlsci, icslta,or any
string achieved by full or partial capitalization
of letters.
No letter is repeated more than three times in a
row.
Must contain a minimum of eight characters.
Must contain a minimum of three of the
following types of characters: capital letters,
small letters, digits, and special characters.
Note:
The complexity level changes will only affect the new user accounts and
password changes. It will not affect existing passwords. Any changes take effect
immediately, and do not require the use of the
Apply
button.
To change your login password:
Note:
You are allowed to only modify your own password.
1
The
Change Password for User
field displays the password for the current login.
2
In the
Enter Current Password
field, enter the current login password.
3
In the
Enter New Password
field, enter the new login password.
4
In the
Re-enter New Password
field, type the new login password again to
confirm. Once the password change is successful, the user will be directed to the
login screen to re-enter their username and password.
Summary of Contents for D9824
