Cisco D9824, Installation And Configuration Manual

Page: 318 / 416

Chapter 6 Service and Maintenance
296
Alarm Message
Type Message Cause/Remedy Description Severity ID
PE n: Loss of
Input Clear Fault reset – – Minor 11000
12000
13000
14000
15000
16000
17000
18000
18009-18032
Digital
Program
Mapping
Set PID Collision Cause: Uplink
settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink
to find the
appropriate
system settings.
Two source
service PIDs
are being
mapped to the
same output
PID. This will
cause data
corruption in
the stream.
Minor 19000
Digital
Program
Mapping
Set Program Collision Cause: Uplink
settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink
to find the
appropriate
system settings.
Two source
channel
numbers are
being mapped/
passed to the
same channel
number in the
output.
Minor 19000
Digital
Program
Mapping
Set Mode-i PMT out
of range Cause: Uplink
settings may have
changed since
setting up the unit.
Please check your
DPM settings.
Remedy: Correct
the DPM settings.
Check the uplink
to find the
appropriate
system settings.
PMT PID to be
used for Mode-
i is outside of
valid MPEG
PID range.
Major 19000