Cisco D9824 Installation And Configuration Manual Download

Page: 241 / 416

Configuring Transport Stream Information

219

The CDT is different from the other tables listed because the CDT is referred to
within the PMT, rather than outside the PMT. Select

Block CDT Output

override the DPM PID map configuration for CDT PIDs and to always drop all

CDTs. Otherwise, clear the

Block CDT Output

to permit the output of CDTs

following the configured DPM PID map configuration and all other DPM
constraints.

From the

PSI Regeneration Option

drop-down list, choose whether to

regenerate the PSI tables to the output. You can choose

Always

to regenerate all

the tables or

As Needed

to only regenerate the tables if the content has changed.

Click

Apply

Click

Copy To MOIP

to copy all the DPM data from the ASI output to the MPEG

over IP output.

Summary of Contents for D9824

































































































































































































































































































































































































































Search results

Summary of Contents for D9824

Reviews:

Related manuals for D9824

Brands by name

Popular brands

Cisco D9824, Installation And Configuration Manual

Search results

Summary of Contents for D9824

Reviews:

Related manuals for D9824

Brands by name

Popular brands