WA3RNC 40 Meter CW Transceiver Quick-Kit
Acrylic NO-SOLDER 40M Xceiver
Assembly Instructions
Fig. 1
•
Covers approximately 7.017 to 7.047 MHz.
•
Output is adjustable from 0 to 5 watts with rear panel control.
•
12 dB Rx attenuator switch on rear panel with front panel indicator.
•
Sharp 350Hz bandwidth (-6dB) crystal IF filter for single signal reception.
•
Receiver sensitivity (MDS) 0.15 microvolts, image rejection 68dB
•
Transmitter harmonics and spurs at -55dBC assures FCC compliance.
•
Rx current consumption about 35 ma, Tx 400-800ma at 12V input
•
PC Board is completely assembled, tested, and aligned.
•
User installs tuning and volume control harnesses, and you’re done.
•
Acrylic “Day Glow” cabinet is formed and predrilled.
Summary of Contents for Acrylic NO-SOLDER 40M Xceiver
Page 5: ......
