Christie Roadie HD+35K, User Manual

Page: 87 / 192

Section 3: Operation
Roadie HD+35K User Manual 3-21
020-100340-02 Rev. 1 (01-2010)
3.6 Adjusting the Image
The most commonly used options for image adjustments are accessed through the following 2 Main menu
options:
• Size and Position
•
Image Settings
From either of these two menus, you can change settings affecting the image from the current channel by
working with the appropriate slidebars, check boxes, and drop-down lists.
Pressing
E
XIT
returns you to the previous menu (or to the presentation, if from the
Main
menu), and accept any
changes you may have entered. Settings are saved for the current channel.
From your presentation, you can access any of the individual options in these menus by pressing
M
ENU
,
followed by the appropriate two-digit number representing their location in the Menu system. For example,
press
M
ENU + 2 + 3 to quickly access the "Gamma" option in the
Image Settings
menu.
For certain options, you may prefer to use a "direct key" from the presentation level to go directly to a
particular menu option without traveling through the Menu system (
available for certain display parameters
only ). For example, press
C
ONT
to access the "Contrast" slidebar immediately. Press
E
XIT
to return to your
presentation.
NOTES: 1)
To hide these "direct" slidebars, disable the" Display Slidebars" check box in the Menu Preferences
menu.
2)
To hide the entire Menu system from view, turn OFF the on-screen display by pressing the
OSD
key.
3.6.1 Before You Begin
Using Auto Setup
For a most efficient first step in perfecting the image, press
A
UTO
S
ETUP
on the built-in keypad or
A
UTO
on the
standard IR remote. This initiates an automated process in which the projector quickly optimizes critical
display parameters such as size, position, pixel tracking, etc., based on the type of incoming source data
detected. An
Auto Setup can save considerable setup time, and you can still modify the display parameter
settings as desired using the menu options described below.
3.6.2 Size and Position Menu
Select
Size and Position
(option # 1) from the
Main
menu. To increase or decrease the size of your image,
change its proportion (aspect ratio), move the image to a specific area of the screen, and refine other related
parameters. Use
Size and Position controls to match the image precisely to the screen used at the site.