3-4
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Section 3: Operation
3.1.9 Lamp
Use one of the following lamp sizes (3-Phase ballast requirements):
• 2.0 kW
• 3.0 kW
• 4.5 kW
• 6.0 kW
Keep the lamp door closed and locked for all normal operation. Only trained Christie accredited service
technicians can access the lamp via a security key. Complete lamp details are provided in
Section 6
Specifications
.
3.1.10 Leveling Feet
Turn the four adjustable feet to increase or decrease projector height and/or tilt as needed. For most
installations, the projector is most likely to be slightly inclined to match screen tilt - this reduces the amount of
vertical offset required.
Refer to
Section 2.3 Projector Position and Mounting
. For flown projectors, the feet
can be removed.
3.1.11 DC Power Cables
Heavy-duty DC lamp cables between the ballast and the projection head are 6½ - 100 feet (2-30 meters) in
length. The ballast and projection head include their own North American line cords.
3.1.12 Projection Head
The projection head houses all critical illumination and optical components as well as the DLP processing
technology responsible for combining light and incoming source signals into brilliant high-resolution digital
displays. Source inputs connect to the input panel on the side of the projector. Projector function is controlled
via the built-in keypad, standard IR remote, or another communication link from a controller. The projection
head is closed and locked for normal operation.
3.1.13 Rear Connection Panel
The rear connection panel links the projection head to AC power, to an external RS-422 controller, and to the
other Roadie HD+35K components (ballast, and a wired remote), as described in
Table 3.2
.
Summary of Contents for Roadie HD+35K
