![background image](http://html.mh-extra.com/html/christie/roadie-hd-35k/roadie-hd-35k_user-manual_2604044067.webp)
Roadie HD+35K User Manual
3-1
020-100340-02 Rev. 1 (01-2010)
3 Operation
This section describes how to use the controls and switches for basic projector operation once it is properly
installed, aligned and configured by a Christie accredited service technician, as described in
Section 2
Installation and Setup
.
Refer to Safety Warning and Guidlines in
Section 4 Maintenance
.
3.1
Projector Basics
Primary Roadie HD+35K components are identified below:
Figure 3-1 Basic Roadie HD+35K Projector and Related Components
Projector components are briefly described and listed in alphabetical order in the following section.
3.1.1 Air Filter
Intake air flows through the filter before circulating in the front compartment to cool the main electronics.
Replace the air filter whenever the lamp is replaced-or sooner in dusty/dirty environments.
Refer to
Section 4.4
Replacing the Lamp & Filter
for complete instructions.
IMPORTANT!
Check condition monthly.
Anode
Lead
Control
Interlocks
Line Cord
ON/OFF Breaker
3-Phase
Status LEDs
& Voltmeter
Cathode
Lead
3-Phase 7 kW Ballast
Air
Filter
OFF
Wired IR
Remote
ON
Handles
(1 piece)
Lamp
Leveling Feet (4)
Rear
Connection
Panel
Line
Cord
Status &
Control
Panel
Exhaust Hood
(incl. extractor fan )
Projection Head
Inputs
Communications
Rear IR
Sensor
Front IR Sensor
Summary of Contents for Roadie HD+35K
