Christie Roadie HD+35K, User Manual

Page: 122 / 192

3-56 Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Section 3: Operation
Figure 3-32 PIP Menu
(
SWITCHING is not applicable for the projector
)
Use the first of six (1-6) options in the
PIP and Switching
menu to enable and define how you want to use
PIP.
Options 7 and 8 pertain to source switching only, and are not supported in this projector.
Swap Main and PIP Image
Short Cut : Press
S
WAP from your presentation.
Toggle the current picture-in-picture relationship so that the primary (main) image becomes secondary (PIP),
and the secondary image becomes primary. Swapping is available only when PIP is enabled (option 1).
NOTE:
There may be a slight delay when swapping the Primary and Secondary images.
PIP Enable
Short Cut: Press
PIP
from your presentation.
Toggle to display from two sources at once
(Picture-in-Picture) or the primary source only.
This check box turns the secondary source ON
and OFF.
NOTE:
Disable PIP for Interlaced sources >
35kHz.
PIP Size and Position Secondary Menu
Controls in the
PIP Size and Position
menu affect the PIP (secondary) image, functioning in the same
manner as the main controls in the
Size and Position
menu. Refer to Section 3.6.3 Image Settings Menu for
descriptions. Additional options unique to the PIP image are described below.
Position Presets
Set the location of the PIP (secondary) image in the display.
Aspect Ratio Presets
Set the desired aspect ratio of your PIP image to "Default" or "Anamorphic". Refer back to Section 3.6.3
Image Settings Menu for details.
Advanced Size and Position
Refer back to Advanced Size and Position Secondary Menu for details.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Swap Main and PIP Image
PIP Enable
PIP Size & Position
PIP Image Settings
PIP Border Width
PIP Border Color
Numbers Select Main Image
Image Optimization
Fade Time
PIP and Switching
4
Red
PIP Only
Picture
-in-
Picture
Options
Switching
Options
(n/a)