![background image](http://html.mh-extra.com/html/christie/roadie-hd-35k/roadie-hd-35k_user-manual_2604044014.webp)
1-4
Roadie HD+35K User Manual
020-100340-02 Rev. 1 (01-2010)
Section 1: Introduction
1.3.2 List of Components
The following components make up a complete
Roadie HD+35K
system (refer to
Figure 3-1
):
• Projection Head.
Includes
:
• Line cord
• Standard IR remote (
includes batteries for IR use, and 25’ cable for wired use
)
• Security keys for lamp and Igniter service access, plus assorted Allen keys
• Lamp Ballast (7 kW)
• Cable kit (
includes 2 lamp power cables and 2 communication/control cables
)
• Choice of lamp kit (
includes protective gear
)
• Choice of lens (
Anamorphic lens and mount are also both optional
)
1.3.3 Key Features
General
• 3-chip electronics with true 2048 x 1080 native resolution
• Split-projector design; ballast is separate from projection head
• Versatile electronic and optical scaling to automatically maximize the display
• 10-bit digital processing (
8-bit for interlaced high-definition video
)
• Can be rigged, flown and/or stacked with optional FredFrame™ hardware
Lamps / Light Output
• Choice of four Xenon bubble lamp sizes and ratings
• Light output of 32,500 ANSI lumens (35,000 centre lumens) (
6kW lamp
)
• Standard achievable contrast ratio 500:1 ANSI, up to 2800:1 full field ON/OFF
•
LampLOC™
motorized lamp alignment (auto or custom adjustment)
•
LiteLOC™
for maintaining brightness over time
• Internal electromechanical shutter for quick picture mute and black stand-by
• Optional internal optical components for improved contrast ratio and/or wider color gamut
Inputs
There are two different types of input face plate configurations (model dependant). Refer to
Figure 1-1
and
Figure 1-2
. These configurations may include the following inputs:
• One analog RGBHV/YPbPr input with 5 BNCs
• One DVI-I input for either digital RGB/YCrCb or analog RGB/YPbPr signals
• One analog composite-video input, one analog S-video input
• Built-in multi-standard decoder (NTSC, NTSC 4.43, PAL, PALM, PALN, PAL60, SECAM)
• One Dual SD/HD-SDI input (
installed in one of two optional input slots
)
• Up to 220 MHz pixel rate
• Compatible with all current HDTV formats
• Motion adaptive de-interlacing of 50 fps- and 60 fps-originated standard and high-definition interlaced
sources
• Inverse telecine de-interlacing of film-originated standard and high-definition interlaced material with 3:2
drop-down (60 fps) or 2:2 drop-down (50 fps).
For simplicity, this manual refers to the configuration shown in
Figure 1-1
only.
Summary of Contents for Roadie HD+35K
