Christie Roadie HD+35K, User Manual

Page: 93 / 192

Section 3: Operation
Roadie HD+35K User Manual 3-27
020-100340-02 Rev. 1 (01-2010)
Blanking (Top, Bottom, Left, and Right) Options
Select a
Blanking
option from the
Advanced Size and
Position
menu. Crop the image as desired so that unwanted
edges are removed from the display (changed to black as shown
in
Figure 3-16 ). Blanking defines the size of the
Active Input
window, creating an area of interest. Range of adjustment
depends on the source resolution and other factors for your
application.
NOTE:
Blanking a PIP image resembles zoom (refer to
Figure 3-
31
). For example, left Blanking zooms the right side of the
PIP image; Right Blanking zooms the left side. There are
no black bars.
Plug & Display (EDID) Option
Select the
Plug & Play
option from the
Advanced Size and Position
menu. By default, a
Plug & Play
(EDID) source outputs a signal
according to the EDID information provided by the projector. To override
this information and display in a different format (for example, if your
Plug & Play
[EDID] device does not support the projector's resolution
and/or frequency), select the desired
Plug & Play
(EDID) resolution
from the list.
Any daisy-chained projectors also displays according to the chosen Plug
& Play (EDID) format.
EDID = Extended Display Identification Data standard.
3.6.3 Image Settings Menu
Select the
Image Settings
(#2 option) from the
Main
menu. Options in the
Image Settings
menu alter your
image without affecting its size or position. Changes made to the
Image Settings
menu are applied
immediately and are saved when you exit the menu. Options not available for the projector model or source are
disabled and appear dim (gray).
Figure 3-17 Image Settings Menu
Figure 3-16 Blanking of a Primary Image
2048
2048
1080
1080
Image
Example: incoming image
Example: With Blanking
Blanking
(unused pixels)