Christie Roadie HD+35K, User Manual

Page: 169 / 192

Section 6: Specifications
Roadie HD+35K User Manual 6-3
020-100340-02 Rev. 1 (01-2010)
6.3.3 Analog: Sync (Interlaced or Progressive Scan Format)
6.3.4 DVI-I (INPUT 2)
For all other DVI specifications, refer to
6.3.1 Analog: RGB / YPbPr (5 BNCs at INPUT 1)
above.
6.3.5 Dual SD/HD-SDI (INPUT 5 or 6, Standard with Projector)
Input levels
Composite
S-Video, Luma (Y)
S-Video, Chroma (C)
1.0 V
p-p
± 3dB
(including sync tip)
1.0 V
p-p
± 3dB
(including sync tip)
630 m V
p-p
nominal (burst)
DC offset ± 2V
Nominal impedance 75
:
Maximum return loss (VSWR) 1.2:1 dB @ 6 MHz
Input levels
(for composite or separate H & V)
0.5V
p-p
– 4.0V
p-p
Impedance
(for composite or separate H & V)
75
:
Sync type
(for composite or separate H & V)
Separate H and V
Bi-level or tri-level sync-on-green
Bi-level or tri-level composite
Serrations and/or Equalization pulses
MacroVision
•
for stnd. & prog. video
Polarity
(for composite or separate H & V)
Positive or negative
Maximum return loss (VSWR) 1.2:1 dB @ 200 MHz
Interface standard DDWG DVI 1.0
Signal types / color spaces RGB (digital or analog)
YPbPr (analog)
YCbCr (digital) not supported in v1.1 s/w
Pixel clock rate 25 – 165 MHz
Analog sync input impedance 1 k
Maximum cable length 5 meters (16 ft.)
Supports EDID and HDCP
Number of inputs 2, each with active loop-through
Connector type BNCs, 75
:
Supported interface standards SMPTE 259M
(13.5 MHz clock modes only)
SMPTE 292M and 372M
(dual link)
Signal types / color spaces Serial digital YCbCr
(4:2:2 only)
Pixel clock rates supported 13.5 MHz, 74.25 MHz, 74.25/1.001 MHz