Christie Roadie HD+35K, User Manual

Page: 121 / 192

Section 3: Operation
Roadie HD+35K User Manual 3-55
020-100340-02 Rev. 1 (01-2010)
For best PIP or Seamless Switching results, use two different signal types* as defined below. Do not mix two
signals of the same type.
*
HD interlaced sources are not recommended for the PIP window.
Other PIP or Seamless Switching tips to keep in mind include:
• When using 2 digital signals or 1 analog and 1digital, each must be 165 MHz or less.
• When using two analog signals, each must be 90 MHz or less.
• Avoid using an interlaced source in the PIP window
• Seamless switching may affect image quality in some cases
• Seamless switching is not currently supported in this projector
3.9.1 Controlling Your PIP Image
NOTE:
Controls for the primary image are all accessed through the Main menu. To control the secondary (PIP)
image, access picture controls through the PIP and Switching menu.
Signal Type Description (Input Location)
#1 5 BNCs (RGBHV or YPbPr)
#2 DVI - I (analog or digital)
#3 Decoded signals (Input 3, Input 4, Composite video, S-Video, or any video
signal via Input 1 BNC connectors or via an analog option card).
#4 Analog Option Cards
#5 Digital Option Cards
#6 Digital Option Cards
Figure 3-31 Blanking of a PIP Image