Christie Roadie HD+35K, User Manual

Page: 79 / 192

Section 3: Operation
Roadie HD+35K User Manual 3-13
020-100340-02 Rev. 1 (01-2010)
Function Key
If You are Within a Primary or Secondary Menu
You can use the
F
UNC
key on standard IR remote to perform special tasks within the
Menu
system. Each task
is discussed within Section 3. For example, you can press
F
UNC
in the
Channel Setup
menu to enable deletion
or copying of a channel.
If You are Within a Presentation:
Press the
F
UNC
key on standard IR remote followed by a 2-digit
number to enable one or more specific colors in the display (see
right). For example, pressing
F
UNC
+ 6 + 4
display only red and
green data,whereas,
F
UNC
+ 6 + 7
displays all color data.
Eliminating one or more colors can help with certain diagnostics
and setups, such as when accurately overlaying one image on top of
another from stacked projectors.
NOTE:
Color enabling can also be implemented from numerous
locations within the Menu system.
Defining other uses
Through ASCII messaging on a PC, you can also assign special user functions to keys 1 to 5, 7 to 9, and others.
For example, the
F
UNC
key can be programmed to trigger RTEs (Real Time Events) or to display custom
menus. Refer to the separate Christie Serial Communications publication.
Projector Key
Press the
P
ROJ
key on the standard IR remote to access a specific projector within a group of projectors or to
confirm if the local projector is listening. The number in the
Enter Number
window indicates which projector
is currently listening to commands, and matches the projector number that has been defined in the
Menu
Preferences menu.
The "Projector" check box (read-only) shows whether or not the projector physically connected to a remote is
listening to commands from that remote. A check mark means that connected projector is listening; if there is
no check mark, you are communicating with a different projector.
To control a specific projector with the remote, enter the 3-digit number assigned to the projector that you want
to use. If you switch to a projector other than the one you are currently using, the check mark disappears.
To broadcast to multiple projectors, press
P
ROJ twice without entering a projector number.
NOTES: 1) Keypad commands affect all projectors present. 2) There is no method of controlling a group of
projectors within the same wired configuration using the wired IR remote exclusively, since there is only
one wired protocol available.
The "Broadcast Keys" option in the
Communications
menu must be selected for only one specific projector
in a serial network. The remote in use must be OFF (disabled) for the remaining projectors. Refer to 2.14 IR
Remote Protocols and Adjustment and 3.8 Adjusting System Parameters and Advanced Controls .
Enter Key
Press the
E
NTER key on either the built-in keypad and standard IR remote to select a highlighted menu/option
item, to toggle a check box, or to accept a parameter adjustment, and return to the previous menu or image.
Func
Func
Func
Func
Func
Func
Func
6
6
6
6
6
6
6
1
2
3
4
5
6
7
= Red
= Green
= Blue
= Red & Green
= Green & Blue
= Red & Blue
= All Colors