Christie Roadie HD+35K, User Manual

Page: 105 / 192

Section 3: Operation
Roadie HD+35K User Manual 3-39
020-100340-02 Rev. 1 (01-2010)
Signal Types
Either Channel list, whether the
C
HAN key list or the
Channel Setup
menu, identifies signal types in a
shortened form as defined below. These description codes indicate what signal information the projector uses
to identify a match for a given channel, and are preceded by either an "i" (interlaced signals) or "p"
(progressive signal"). Refer to
Figure 3-21 .
Functions within the Channel Setup Menu
To copy, delete or edit a channel, highlight the desired channel in the
Channel Setup
menu and do one of two
things:
• Press
F
UNC if you want to copy the selected channel or delete one or more channels. See Section 3.7.5
Copying a Channel or refer to Section 3.7.6 Deleting One or More Channels .
• Press
E
NTER
if you want to edit a channel’s setup (i.e., non-image related parameters) for the selected
channel. Refer to Section 3.7.7 Editing a Channel Setup .
3.7.5 Copying a Channel
Making a copy of a channel is a quick way to duplicate a channel that contains most of the settings you need
without creating a new one from scratch. This then allows you to adjust the settings specific to the new
presentation required.
To make a Copy of an existing channel, highlight the desired channel in the
Channel Setup
menu, and press
F
UNC
to open the
Channel Copy/Delete
secondary menu. Select "
Copy
" and press
E
NTER
to create a new
channel. It is identified with the next available channel number (01-99). The new channel is identical to the
original channel, but it is identified with the next available number from 01-99. If you change your mind and
do not want to copy the current channel, press
E
XIT
to cancel and return to the previous menu.
Table 3.5 Abbreviations for Signal Type
Codes Signal Type
4WH Composite (4 wire) on HC input
4WV Composite (4 wire) on V input
SG Sync-on-green
5W Separate H,V
5WR Separate H,V swapped
SVid S-Vid
CVid Composite Video
Dig Digital