SQUARE FORMAT DIMENSIONS
Viewing Area
*Overall Length of Case
Approx. Ship. Wt.
H x W
Cm
In.
Cm
Lbs.
Kg
50" x 50"
127 x 127
86
3
/
4
"
220
140
63.5
60" x 60"
152 x 152
97
3
/
4
"
248
155
70.3
70" x 70"
178 x 178
109
1
/
4
"
277
183
83.0
84" x 84"
213 x 213
125
3
/
4
"
319
211
95.7
6' x 8'
183 x 244
135
3
/
4
"
345
244
110.7
8' x 8'
244 x 244
139
1
/
4
"
354
244
110.7
7' x 9'
213 x 274
149
3
/
4
"
380
267
120.2
9' x 9'
274 x 274
148
1
/
4
"
377
267
120.2
8' x 10'
244 x 305
163
1
/
4
"
415
279
126.6
10' x 10'
305 x 305
160
1
/
4
"
407
279
126.6
9' x 12'
274 x 366
183
3
/
4
"
467
323
146.5
12' x 12'
366 x 366
193
1
/
4
"
491
328
148.8
VIDEO (NTSC 4:3) FORMAT DIMENSIONS
Viewing
Nominal
Approx. Ship.
Area
Diagonal
*Overall Length of Case
Wt.
H x W
Cm
In.
Cm
In.
Cm
Lbs.
Kg
43" x 57"
109 x 145
72"
183
92
3
/
4
"
236
156
70.8
50" x 67"
127 x 170
84"
213
103
3
/
4
"
264
183
83.0
60" x 80"
152 x 203
100"
254
117
3
/
4
"
299
211
95.7
69" x 92"
175 x 234
120"
305
131
3
/
4
"
335
244
110.7
87" x 116"
221 x 295
150"
381
158
3
/
4
"
403
279
126.6
108" x 144"
274 x 366
180"
457
183
3
/
4
"
467
323
146.5
120" x 160"
305 x 406
200"
508
200
3
/
4
"
510
353
160.1
HDTV (16:9) FORMAT DIMENSIONS
Viewing
Nominal
Approx. Ship.
Area
Diagonal
*Overall Length of Case
Wt.
H x W
Cm
In.
Cm
In.
Cm
Lbs.
Kg
45" x 80"
114 x 203
92"
234
116
1
/
4
"
295
211
95.7
52" x 92"
132 x 234
106"
269
128
3
/
4
"
327
244
110.7
54" x 96"
137 x 244
110"
279
133
1
/
4
"
338
250
113.4
58" x 104"
147 x 264
119"
302
141
3
/
4
"
360
261
118.4
65" x 116"
165 x 295
133"
338
154
3
/
4
"
393
279
126.6
78" x 139"
198 x 353
159"
404
179
3
/
4
"
457
300
136.1
SPECIFICATION DATA
S
UGGESTED SPECIFICATIONS:
_________________________ projection screen(s), __________________(H) x ________________
(W), electrically
operated 120 volt (60 Hz) not more than 2.2 amp. Three wire quick reversal motor especially designed for the purpose, to be ball
bearing and oiled for life. With automatic thermal overload cut-out and integral interlocking gears. To have pre-set but adjustable limit
switches to automatically stop screen surface in the “down” position. Stop action to be positive to prevent coasting. The roller to be
of rigid metal at least 3" in diameter and mounted on two heavy duty brackets equipped with self-aligning bearings. Screen surface to
be seamless, flame retardant and mildew resistant vinyl with black masking borders standard. Each side of the fabric to have tab guide
cable system to maintain even lateral tension and hold surface flat. Custom slat bar with added weight maintains vertical tension on
the screen surface. The ends of the slat to be protected by heavy duty plastic caps enclosing a preset adjustable mechanism for
screen tensioning. Case to be of wood, with double top for extra rigidity and strength. Motor compartment to be metal lined. A
section of the bottom of the case shall be equipped with hinges and connected to the drive mechanism so that it opens and closes
automatically with the lowering and raising of the screen surface. The door will lift to the closed position where a micro switch shall
cut off the electrical current to the motor. Balance of the bottom panel shall be pegged to manual opening to provide access. Hinges
shall be mounted to allow matching of the bottom panel to the ceiling.
(Specify Type 1 and 2 or Type 3 hinge, as required.)
Case to
be finished with a black primer coat, ready to accept final finish by others. To be complete with three position control switch with
cover plate. Screen to be listed by Underwriters’ Laboratories and CSA.
All viewing surfaces will be seamless.
All viewing surfaces are standard with black backing except Da-Tex
®
and Dual Vision.
Audio Vision, High Contrast Audio Vision and High Contrast Cinema Perf available in sizes up to 87" x 116" in Video Format and 78" x 139"
in HDTV Format.
TENSIONED EXECUTIVE
ELECTROL
®
Automatic Electric Projection Screen Model
DA-LITE SCREEN COMPANY, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: [email protected]
*Add 7" to overall length for mounting brackets.
All screens standard with 12" black drop at the top.
Extra drop may alter case dimensions. Contact Da-Lite for details.
Overall case length dimensions ±
1
/
4
".
Specifications subject to change without notice.
Detailed dimensional drawings, wiring diagrams and installation
instructions available upon request.
Custom formats and sizes available upon request.
