Chopin Mixolab, Maintenance Manual

Page: 65 / 144

Chapter 3 Repair 65
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
1. Remove the right casing (see op. 1-1) .
Note : Record the location of the hydraulic connection on the tank
(see (see hydraulic schematic on page 63 ) . Mark the position
of the bowl against the cap in order to prevent the level detec-
tor from being exposed to the heating part.
2. Unplug all hydraulic connections on the tank.
3. Unplug the connector of the double level detector on the CPU
board (
A ).
4. Undo the 3 fixation screws of the tank cap ( B ), then remove
the tank cap.
5. Cut the two cable ties flush along the buffer tank length.
6. Unplug the hydraulic connection at the bottom of the buffer
tank (
C ).
7. Undo the 4 fixation screws of the buffer tank and remove the
buffer tank (
D ).
Reffiting the new buffer tank does not require any particular instruc-
tion.
Note : For the replacement of the hydraulic tube, make use if nee-
ded of the schematic of Operation 4-1 .
4 : Hydraulic components
Operation 4-3 Dismantling/installing the buffer tank
Sheet: 1 / 1
Consumables:
Tools:
-
-
A C B C
D