Chopin Mixolab, Maintenance Manual

Page: 45 / 144

Chapter 3 Repair 45
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
a. Dismantling/installing the filter switch
1. Remove the Mixolab right casing (see op. 1-1) .
Record the actual location of each electrical wire from the
switch on the grey terminal block (
A ).
2. Disconnect the filter wires from this terminal block: insert a
narrow tool in the hole close to the connection and pull out the
wire (
B ).
3. Undo the attachment screws of the filter switch. Pull out the
switch from the chassis
(C) .
4. Replace the filter switch.
For installing the filter switch, carry out the above operations in
reverse order.
For replacing the fuse in the filter switch, use the fuse type
required by the manufacturer. See chapter
4 "Spare parts" .
1 : Basic operations
Operation 1-4 Filter switch
Sheet: 1 / 1
Consumables:
Tools:
Cable ties
-
C
B A