Chopin Mixolab, Maintenance Manual

Page: 42 / 144

42 Chapter 3 Repair
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
9. Remove the circlips from the gas spring upper axle ( H ), then
rotate the gas spring to the front.
10. Undo the screw attaching the cover on to the distribution block
( I ).
.
11. Unplug connector ( J ) of the magnetic holder from the CPU
board, then cut the cable tie.
12. Unplug connector ( K ) of the magnetic detector from the CPU
board, then cut the cable tie.
13. Slide upwards the central casing and remove it.
Refitting the central casing does not require any particular instruc-
tion. Make sure however to remount cable ties where required.
1 : Basic operations
Operation 1-2 Dismantling/installing the central casing
Sheet: 2 / 2
Consumables:
Tools:
Cable ties
-
I H
K J